Independent Testing · Inspection · Stock Verification · Collateral Management

Steel Cargo Loading & Discharge

Steel that arrives as it was shipped

Steel cargo is heavy, high-value and easily damaged by moisture, poor stowage or weak lashing. Our surveyors protect it from the quay to the vessel's hold – and back out again at discharge.

Steel Products

Every form of finished and semi-finished steel

We survey steel cargo shipped as break bulk on general cargo vessels, bulk carriers and in containers.

  • HR & CR Coils
  • Galvanised Coils
  • Plates & Sheets
  • Billets & Blooms
  • Wire Rods
  • TMT / Rebars
  • Pipes & Tubes
  • Beams & Structurals
  • Slabs

Damage Prevention

Problems found and fixed before the vessel sails.

Claims Evidence

Photo-documented condition records that support or defend claims.

Accurate Tally

Piece-by-piece count matched to the packing list.

Safe Voyage

Stowage and securing that withstand sea conditions.

A

Pre-Loading Survey & Stowage Plan

Before loading starts, we record the condition of the cargo at the quay or warehouse and review the stowage plan for the vessel.

Pre-existing rust, wet damage, bent edges, dented coils and torn packing are recorded and photographed, so the shipper is not held responsible for damage that existed before loading. The stowage plan is checked for weight distribution, tank top loading limits and separation of cargo by port and consignee.

  • Pre-loading condition survey
  • Rust & wet damage assessment
  • Packing & marking checks
  • Hold condition & cleanliness
  • Stowage plan review
  • Tank top load check
Steel being worked in a mill
B

Loading & Discharge Supervision

Our surveyors attend throughout cargo operations to make sure steel is handled, lifted and placed correctly.

We check the use of suitable lifting gear such as C-hooks, coil tongs and spreader beams, and stop unsafe or damaging practices. At discharge, the same attention confirms cargo leaves the vessel in the condition it arrived.

  • Handling & lifting gear checks
  • Stowage as per plan
  • Weather & rain monitoring
  • Hatch closing supervision
  • Discharge supervision
  • Statement of facts
Cargo operations at a port
C

Tally & Cargo Condition

Every piece is tallied against the packing list and bill of lading, and its condition recorded as it is loaded.

Damaged pieces are identified, photographed and reported before they go on board – allowing them to be replaced or clearly remarked on the mate's receipt.

  • Piece-wise tally
  • Heat & coil number checks
  • Weight verification
  • Damage identification
  • Photo documentation
  • Tally & condition report
Surveyors checking documents
D

Dunnage & Lashing Supervision

Steel cargo that shifts at sea damages itself, other cargo and the ship. Correct dunnage and lashing prevent it.

We check that dunnage is dry, adequate and properly laid, and that coils, plates and long products are chocked, lashed and secured in line with the vessel's Cargo Securing Manual – then issue a lashing certificate before sailing.

  • Dunnage quality & placement
  • Coil chocking & wedging
  • Lashing & securing checks
  • Cargo Securing Manual compliance
  • Lashing materials inspection
  • Lashing certificate
Cargo vessel at sea

Steel Cargo Enquiries

Shipping or receiving steel?

Share the vessel, port, product and quantity – we will confirm availability and scope.

Request a Quote